A-600
| Product Code: | PST001 |
|---|
The A-600 is a preparing device for skiving (grind to a thin wedge for a glued Thermofix joint) of belts up to a width of 600 mm (wider if working in several steps) and a thickness of 6mm. It features a frame to firmly clamp the belt end and hold it in the correct position on a table for grinding of the wedge. Material is ground off using a belt sander. This belt sander is precisely guided on the frame, resulting in a skive of precisely the required geometry. The A-600 is suitable for on-site preparation and low to medium volume preparation of Thermofix joints of conveyor belts in the fabrication workshop.
Related Products
AT-200
A preparing device for skiving belts and tapes up to a width of 200mm width and thickness of 7mm.
AT-1201
A preparing device for skiving belts up to a width of 1200mm width and thickness of 6.5mm.
AT-305
A preparing device for skiving belts up to a width of 300mm width and thickness of 6mm.
AT-306
A preparing device for skiving belts up to a width of 300mm width and thickness of 6mm.
AT-60
A preparing device for skiving belts up to a width of 60mm width and thickness of 2mm.
Some of the companies we supply products to:
